Liebert 3000VA 사용자 설명서

Unpack the UPS and conduct the following checks: 

• Inspect the UPS for shipping damage. If any shipping damage is found, report it to the carrier and 

your local dealer or Emerson

®

 representative immediately.

• Check the accessories against the delivery list. If there is any discrepancy, contact your local 

dealer or your Emerson representative immediately.

• Terminal Block Communication terminals
• Compact Disk with:

• Liebert MultiLink

®

• Configuration Program
• User Manual

• USB Cable: one, 2m (6-1/2 ft.) long
• Mounting hardware, including screws and handles
• Plastic tower stand sets: 2 (four pieces)
• Warnings, Safety Instructions booklet and WEEE recycling sheet (ISO 14001 compliance)
• for 700VA - 1500VA: (2) 10A IEC C13 C14 Output Cable, 2m (6-1/2 ft.) long
• for 2000VA - 3000VA:

• (3) 10A IEC C13 C14 Output Cable, 2m (6-1/2 ft.) long
• (1) CEE 7/7 (Schuko) to IEC C20 Input Cable, 2.5m (8-1/5 ft.) long
• (1) BS1363 (UK) to IEC C20 Input Cable, 2.5m (8-1/5 ft.) long

• Install the UPS indoors in a controlled environment, where it cannot be accidentally turned Off. 

The installation environment should meet the specifications in 9.0 - Specifications.

• Place the UPS in an area where airflow around the unit is unrestricted and away from water, 

flammable liquids, gases, corrosives and conductive contaminants. Avoid direct sunlight.

Maintain a clearance of at least 100mm (4 inches) in the front and rear of the Liebert GXT3. Do not 

obstruct the air inlets on the front panel and rear panel of the UPS; blocking the air inlets reduces 

ventilation and heat dissipation, shortening the service life of the Liebert GXT3.

NOTE
The GXT3 External Battery Cabinet shipping package includes one battery cabinet, two 

NOTE
Operating the Liebert GXT3 in temperatures above 25°C (77°F) reduces battery life.