Liebert 3000VA 사용자 설명서

c. Pull the logo on the front plastic bezel cover, rotate it 90 degrees clockwise and snap it back 

into position. The rotated front plastic bezel cover is shown in Figure 9.

d. Replace the front plastic bezel cover on the Liebert GXT3. At this point, the UPS operation 

and display panel and logo have been rotated 90 degrees clockwise, which provides upright 

viewing for users.

5. Place the Liebert GXT3 and any battery cabinets on the support bases. Each Liebert GXT3 needs 

four support bases, as shown in Figure 9.