Liebert 3000VA 사용자 설명서

5. Extend bracket assembly by sliding the front member forward until it touches the rack’s front 

vertical rails (adjustable length: 18 inches to 32 inches).

6. Use two M5 screws to attach each front member onto the front vertical rails through the 

installation holes. Make sure that the bracket assemblies are at the same mounting height on all 

four of the rack’s vertical rails (see Figure 12.)

7. Fasten the rear and front members together using four M4 screws and four M4 nuts (M4 nuts 

have been installed on the rear member before delivery) per bracket assembly, as shown in 

M5 screw (4 pcs)

Vertical pole

Rear member

Front member

Front vertical pole

M5 screw (4 pcs)

Front member

Rear member

Sli

de

M4 screw (8 pcs)

Rear member

Front member

M4 nut (8 pcs)