Emerson XDF 사용자 설명서

To remove the right panel from the XDF: 
1. Locate the four panel retainers on the outside of the right XDF panel. One retainer is in each 

corner of the panel.

2. Using the factory-supplied T-handle Allen wrench, turn the panel retainers counterclockwise 

90 degrees.

3. Lift the panel off the lip at the bottom of the XDF and set it in a safe location.

1. Set the panel on the lip at the bottom of the XDF frame.
2. Using the factory-supplied T-handle Allen wrench, turn each of the four panel retainers clockwise 

90 degrees.

3. Left panel only: Using the factory-supplied T-handle Allen wrench, turn the internal security 

fasteners clockwise 90 degrees. 

Risk of electric shock. Can cause injury or death.
Disconnect all local and remote electric power before working within and/or installing 

equipment.

Risk of heavy panel falling off. Can cause injury and/or equipment damage.
Support the panel when removing it. Unlocking the security fasteners and removing the panel 

retainers will allow unsupported panel to fall.