Motorola MS4404 사용자 설명서
7 - 10 Symbol MS4404/MS4407 Integration Guide
Gain
Parameter # F4h, F0h, A7h
This parameter only applies when Decoding or Image Capture Autoexposure is disabled. Gain is a means of
amplifying the raw image data before it is converted into 256 grayscale values. Increasing the gain increases
brightness and contrast, but also increases noise (undesired electrical fluctuations in the image) which makes the
image less attractive and/or harder to decode.
amplifying the raw image data before it is converted into 256 grayscale values. Increasing the gain increases
brightness and contrast, but also increases noise (undesired electrical fluctuations in the image) which makes the
image less attractive and/or harder to decode.
To set the manual gain, capture the bar code below followed by 3 bar codes from
in the range of 79 to 127, representing the value. The default is 100.
Set Gain