Motorola MS4404 사용자 설명서
7 - 12 Symbol MS4404/MS4407 Integration Guide
LED Illumination
Parameter # F0h, ADh
Select whether to use internal LED illumination (provided by the Symbol MS440X), external illumination (provided
outside the Symbol MS440X), or both.
outside the Symbol MS440X), or both.
This parameter only applies for decoding if
is enabled, or for image capture if
is enabled. If Decoding Illumination or Image Capture Illumination is
disabled, all illumination is off for that mode, regardless of this LED Illumination setting.
Snapshot Mode Timeout
Parameter # F0h, 43h
This parameter sets the amount of time the imager remains in Snapshot Mode. The imager exits Snapshot Mode
upon a trigger event, or when the Snapshot Mode Timeout elapses. To set this timeout value, capture the bar code
below followed by a bar code from
upon a trigger event, or when the Snapshot Mode Timeout elapses. To set this timeout value, capture the bar code
below followed by a bar code from
. The default value is 0 which represents 30
seconds; values increment by 30. For example, 1 = 60 seconds, 2 = 90 seconds, etc.
Internal Illumination
(00h)
*External Illumination
(01h)
Internal and External Illumination
(02h)
Snapshot Mode Timeout