Uniden UBC72XLT 사용자 설명서
36
Special Features
7. Press E while C-C.PS appears. One of the
following Pager Screen options appears.
PS On: The scanner ignores hits on common
pager frequencies.
PS OFF: The scanner alerts you when it receives
hits on common pager frequencies.
8. Repeatedly press or until the option you
want appears, then press E to select it.
9. When you select the option, press Scan to start
Close Call search. Otherwise, to continue normal
scanning, repeatedly press Func until disappears
then press Scan.
scanning, repeatedly press Func until disappears
then press Scan.
Using Close Call RF Capture
To turn on the Close Call feature, press Func +
once except in band select or program mode.
appears. Every 2 seconds, the scanner checks
for frequencies in the range you specified in “Setting
the Close Call Options” on Page 34 and interrupts the
audio when it checks for a Close Call transmission in
that range.
the Close Call Options” on Page 34 and interrupts the
audio when it checks for a Close Call transmission in
that range.
Notes:
•
Set the squelch tight (where only strong signals
are received) while using Close Call.
are received) while using Close Call.
•
To continue scanning normally while the Close
Call feature is working, simply press Scan twice.
Call feature is working, simply press Scan twice.
When the scanner finds a frequency, it sounds the
alert you specified in “Setting the Close Call
Options” on Page 34, and Found flashes. Press any
alert you specified in “Setting the Close Call
Options” on Page 34, and Found flashes. Press any
key to confirm the displayed frequency. Press Scan
to resume scanning. Or press or while the
frequency and appear to select the band where
you are searching.
to resume scanning. Or press or while the
frequency and appear to select the band where
you are searching.
F
F