Uniden UBC72XLT 사용자 설명서

38

Press 0-9 to enable or disable the search bank 
number being searched in this mode. Enabled bank 
numbers appear. (Disabled bank numbers 
disappear).

At least one search bank must be enabled. (The 
scanner sounds an error tone if you try to disable all 
the search banks). The search bank and the 
frequency where chain search starts depends on 
how the scanner was set before you selected chain 
search mode.

To start chain search hold mode, press Hold in 
chain search mode. The scanner stops searching 
and Hold appears. In this mode, pressing 
Func +    changes the search direction downward 
and pressing Func +    changes the search 
direction upward.   or    appears according to the 
current search direction.

You can store frequencies you find in chain search 
mode or chain search hold mode.
1. Press Func + Pgm in chain search mode or 

chain search hold mode. The lowest blank 
channel and bank appear.

2. Press E to store the frequency into the blank 

channel. To select another channel, press Func 
+  

or 

Func +    before you press E. You can 

also press 0-9 to select the bank.

If you try to save a frequency that is already stored, 
the scanner sounds an error tone and displays the 
channel that was duplicated. If you entered the fre-
quency by mistake, press  . To enter the frequency 
anyway, press E to accept.