Uniden UBC72XLT 사용자 설명서

40

2. Enter the frequency you want to start from by 

using the number keys. (Press    to enter a 
decimal point).

3. Press Func +   or Func +  . The scanner 

searches, starting from the frequency you 
entered in Step 2. 

If you enter a frequency that is out of range, the 
scanner sounds an error tone and Error appears.

Press Func +   to change the search direction 
downward or Func +   to change the search 
direction upward. Frequencies appear during the 
search.

Notes:
•

You can set the delay function on or off during 
the search or while the search stops.

•

You can skip a frequency when the search stops. 
After the search skip frequency is set, the scan-
ner starts direct search again.

To stop searching during direct entry search, press 
Hold. Hold appears. In this mode, pressing Func + 

 changes the search direction downward and 

pressing Func +   changes the search direction 
upward.   or    appears depending on the search 
direction.

Press Func +   to decrease the frequency by one 
step or Func +    to increase it by one step. Hold 
down     or   for about 1 second to quickly 
increase or decrease the frequency.

To resume direct search, press Func + Src or Hold. 

 or   appears on the display, showing the search 

direction.