Uniden UBC92XLT 사용자 설명서

29

press Func +   or Func +   to step through the 
frequencies.

To release the hold and continue searching, press 
Hold. Or, if you did not press Hold, simply press 
Func +   or Func +   to continue searching.

You can store frequencies you found during service 
search or service search hold mode into channels.
1. Press Func and Pgm during service search or 

service search hold mode. The frequency and 
the lowest blank channel alternately appear.

2. Press E/Pgm to store the frequency into the 

blank channel. If you want to select another 
channel, press Func +   or Func +   before 
you press E/Pgm. You can also use the 0-9 key 
to select the bank.

If you entered a frequency that has already been 
entered elsewhere, the scanner sounds an error 
tone and displays the channel that was duplicated. 
If you entered the frequency by mistake, press  /Clr 
then enter the correct frequency. To enter the 
frequency anyway, press E to accept.

To begin scanning channels, press Scan. 
The scanner scans through all non-locked channels 
in the activated banks. (See “Locking Out Channels” 
on Page 39 and “Turning Channel-Storage Banks 
On and Off” on Page 38). When the scanner finds a 
transmission, it stops on it. When the transmission 
ends, the scanner resumes scanning.

UB324 Paper OM reduced size.fm  Page 29  Wednesday, February 2, 2005  8:01 PM