Uniden UBC92XLT 사용자 설명서

36

and lowest blank channel alternate on the 
display.

2. Press E/Pgm to store the frequency into the 

blank channel. To select another channel, 
repeatedly press Func +   or Func +   to 
select the blank channel you want, then press E. 
You can also use the 0-9 keys to select the bank.

If you enter a frequency that has already been 
entered elsewhere, the scanner sounds an error 
tone and displays the channel that was duplicated. If 
you entered the frequency by mistake, press  /Clr. 
To enter the frequency anyway, press E/Pgm to 
accept.

The scanner moves to program mode after you 
stored the frequency.

You can skip up to 50 specified frequencies during a 
search. This lets you avoid unwanted frequencies or 
those already stored in a channel.

Note: Search skip frequencies are shared by service 
search, direct entry search, chain search. If skip 
frequencies are sent in certain mode, the 
frequencies are also skipped in other search modes.
To skip a frequency, press Func and L/O when the 
scanner stops on the frequency during a search or a 
search hold. The scanner stores the frequency in 
memory and automatically resumes the search if it is 
not in hold.

Follow these steps to clear a single frequency from 
skip memory so the scanner stops on it during a 
search.

1. Press Hold to stop the search.

UB324 Paper OM reduced size.fm  Page 36  Wednesday, February 2, 2005  8:01 PM