Uniden UBC92XLT 사용자 설명서

37

2. Press Func +   or Func +   to select the 

frequency. L/O appears.

3. Press Func + L/O. L/O disappears.

To clear all the skip frequencies at once while 
searching or search hold, press Func then press 
and hold L/O until the scanner beeps.

Notes:
•

If you selected all frequencies to be skipped 
within the search range, the scanner beeps 3 
times and does not search.

•

If you select more than 50 frequencies to skip, 
each new frequency replaces a frequency 
previously stored, beginning with the first stored 
frequency.

•

Press Func +   or Func +   to select a 
skipped frequency while Hold appears. L/O 
appears when you select a skipped frequency.

Sometimes a user might pause before replying to a 
transmission. To avoid missing a reply on a specific 
channel, you can program a 2-second delay into any 
channel or frequency. The scanner continues to 
monitor the channel frequency for an additional 
2 seconds after the transmission stops before 
resuming scanning or searching. The scanner 
automatically sets a delay when you store 
frequencies into channels or when you search 
frequencies. When the delay feature is on, DLY 
appears. If it is off, follow one of these steps to 
program a delay depending on how the scanner is 
operating.
•

If the scanner is scanning and stops on an active 
channel where you want to store a delay, quickly 

UB324 Paper OM reduced size.fm  Page 37  Wednesday, February 2, 2005  8:01 PM