Uniden BCD396T 사용자 설명서

55

• Keypress  The backlight turns on when any key 

is pressed then stays on for 10 seconds.

• Infinite  The backlight turns on when you 

press 

 then stays on until you press 

 again.

Pressing any key while the backlight is on extends the 
backlight period. Pressing 

 while the backlight is on 

turns off the backlight.

 

 

 Settings 

    

Set Audio AGC 

  

• On  Audio AGC is turned on.
• Off  Audio AGC is turned off.

This setting helps balance the audio level you hear as 
you listen to different radio sources so you can hear 
them at a similar volume. Use this setting if you listen 
to an audio source that has natural changes in audio 
level for which you want to compensate.

 

 

 Settings 

  

 

Adjust Contrast 

  

Contrast 1 - 15 the scanner adjusts the display to 

the contrast level you select.

This setting controls the display’s contrast (how light 
or dark it appears). Use this setting to change the 
contrast for different viewing conditions. There are 15 
contrast settings. You see the change in contrast as 
you scroll through the settings.

Important! This deletes all preprogrammed data. 
You cannot restore preprogrammed data that has 
been deleted.

To initialize the scanner’s memory, turn off the 
scanner. Then, press 2, 9, and Hold while turning it on.