Uniden BCD396T 사용자 설명서

56

To connect your scanner to a personal computer, you 
must first set the scanner’s baud rate (the rate at 
which data is transferred between the scanner and the 
computer, in bits per second (bps)). 

Hint: If you have trouble transferring data between 
your scanner and your computer, try setting the baud 
rate to a slower setting.

Use the included connection cable to connect your 
scanner to another BCD396T scanner or your 
personal computer. 

 

 

 Settings 

  

 

PC Control 

  

PC Control  Lets you set the baud rate your 

scanner uses to communicate with a personal 
computer.

• Off  The baud rate is not set.
• 9600 bps  The baud rate is set to 9600 bps.
• 19200 bps  The  baud rate is set to 19,200 bps.
• 38400 bps  The baud rate is set to 38,400 bps.
• 57600 bps  The baud rate is set to 57,600 bps.
• 115200 bps  The baud rate is set to 115,200 bps.

Lets you set your scanner as a master (source) or 
slave (recipient), letting you transfer programming to 
or from another BCD396T scanner. See “Wired Clon-
ing” on Page 57 and “On-Air Cloning” on Page 58.