Uniden BCD396T 사용자 설명서

58

 

 

 Xfer Information 

  

 

On-Air Clone 

  

• Start Cloning Start on-air cloning.
• Set Frequency  Lets you set the frequency 

where your scanner receives the cloning 
broadcast.

• Set Modulation Lets you set the cloning 

broadcast’s modulation type.

To clone (copy) data from a transceiver to a BCD396T 
scanner, you need a transceiver, a PC that has an 
audio input, and a cable to connect your PC’s sound 
card to the transceiver. Follow the directions supplied 
with the Uniden Advanced Scanner Director Software 
(available online at http://www.uniden.com) to 
construct a cable and use on-air cloning.

When you are receiving the cloning broadcast and are 
ready to clone the scanner, select Start Cloning 

on the scanner. The scanner receives the data from 
the transmission 

When the transfer is complete, Complete appears. If 

the transfer did not work, Error appears.