Uniden BCT15 사용자 설명서

54

To select systems to scan, press Scan then press the quick key assigned to the 
system or systems you want to scan. For quick keys [0] - [9], press the quick key’s 
number. For quick keys 10-99, press [.No] then press the quick key’s 2-digit 
number. To stop scanning the system(s), press [.No] (if the quick key is a 2-digit 
quick key) then the number button or buttons again.

The Sx: (system) indicators on the display show the systems that are currently 
selected.

To select or lock out a system that is not assigned to a key, press 

F

 then rotate 

the Scroll Control 

until the desired system is selected. Then, press [L/O] 

within 2 seconds to either lock out or unlock the system.

Within a system, you can assign groups of channels to a group quick key (see 
“Setting the Group Quick Key” on Page 93). 

Follow these steps to activate or deactivate a channel group within a system while 
scanning.

1.

Tap 

F

 

then turn the Scroll Control to switch to the Function Mode. Then 

 

to select the system that has the channel group you want to enable or disable. 

2.

While 

f

 still appears on the display, press the number key corresponding to 

the channel group you want to activate or deactivate.

Follow these steps to lock out a system so that it does not scan even if its quick 
key is selected.

1.

Tap 

F

 to switch to the Function Mode then rotate the control to select the 

desired system.

2.

Press [L/O] to temporarily lock out the system. Temporary L/O appears. Or, 
quickly press [L/O] twice to permanently lockout the system. Locked Out 
appears.

3.

To unlock temporarily locked out systems, turn power off and then back on. To 
unlock permanently locked out systems, repeat Steps 1 and 2. System 
Unlocked

 appears.