Uniden BCT15 사용자 설명서

55

If the scanner has stopped on a channel press [L/O] once to temporarily lock it out 
or quickly press [L/O] twice to permanently lock it out. Cycling power off/on 
automatically unlocks temporarily locked-out channels.

To lockout a channel when the scanner has not stopped on the channel, or to 
unlock a permanently locked-out channel.

1.

Press [HOLD/RESUME] to hold on a channel.

2.

Tap 

F

 to switch to the Function Mode , then rotate the control 

 to select the 

system where the channel is stored.

3.

Tap 

F

 or wait 2 seconds, then rotate the Scroll Control 

 to select the 

channel you want to lock or unlock.

4.

Press [L/O] to temporarily lock or unlock the current the channel. Double-tap 
L/O to permanently lockout the current channel.

While you are scanning a trunked system, the scanner can be in either ID Scan or 
ID Search mode:

• ID Scan — the scanner only stops on talk group ID’s (TGID) that you have 

programmed into the system that are unlocked.

• ID Search — the scanner stops on any unlocked talk group that becomes 

active.

To toggle between ID Scan and ID Search, press

 

F

 

then press [SCAN/SEARCH] 

while the scanner is scanning the system.

If the scanner does not scan the system long enough for you to easily do this, 
press 

F

 

and rotate the Scroll Control to select the changed system. Then, press 

[SCAN/SEARCH] within 2 seconds.

To temporarily hold on a system, tap 

F

. To hold on a different system, tap 

F

 then 

rotate the control to select the system. Normal scanning resumes 2 seconds after 
your last selection.

To permanently hold on a site or system, press and hold the Scroll Control for 2 
seconds. 

f

 flashes in the display’s upper left corner. The scanner continues to