Uniden BC-RH96 사용자 설명서

11

There are three cables that you can connect to the BC-
RH96.

The DC power cable
The Remote Control cable
The Data Port cable (not supplied with BC-RH96) 

To provide power to the Remote Head, insert the barrel 
of the cigarette lighter adapter into the jack in the back 
of the unit marked DC IN 13.8V. Insert the other end 
in a convenient socket on the dash of your vehicle.
To connect a power lead permanently, obtain a barrel 
connector 5.5 mm diameter, with a center pin  mm 

●

●

●

diameter and wire it with the center positive using at 
least 18 gauge wire to an extra fuse block terminal of 
your vehicle.

The Remote Head cannot turn power to the scanner 
off or on. Therefore, consider connecting the power 
lead of the scanner to a terminal on your vehicle that is 
turned off when you turn off the ignition key.

The ten-foot supplied Control Cable has a stereo mini-
plug on one end and a scanner serial connector on the 
other. Insert the mini-plug into the REMOTE jack on 
the rear of the Remote Head. Route the cable through