Uniden BC-RH96 사용자 설명서

7

The following two mounting methods are suggestions 
used by most. Depending upon your individual 
situation, you may decide on a different approach. 

For most vehicles, the supplied bracket will be the 
easiest method of mounting.
With the bracket removed from the Remote Head, use 
the holes in the bracket as a template to initially mark 
the location you plan to use in your vehicle. Be abso-
lutely certain of what might be behind the mounting 
surface before making any holes, be it above, or below, 

or in front of your dash, armrest console, or other 
location. If you drill carelessly, expensive damage can 
result. If in doubt, consult your vehicle dealer’s service 

department or a qualified professional installer.

Important: AVOID AIRBAG DEPLOYMENT 
ZONES. Ignoring this installation concern may result 
in bodily harm and the inability of the airbag to per-
form properly.
Be sure to select a mounting location so that when you 
route power and remote cables they do not interfere 
with any existing cables or other controls.
Check local laws to determine if using a scanner is 
legal in your area.