Uniden UBC3500XLT 사용자 설명서

41

which data is transferred between the scanner and the 
computer, in bits per second (bps). 
Important! Before you start 
transferring data between your 
scanner and your computer, make 
sure the batteries are fresh or fully 
charged. If the scanner loses power 
while you are transferring data, its 
memory might be corrupted and all 
information programmed in the 
scanner might be erased.
Hint: If you have trouble transferring 
data between your scanner and your computer, try 
setting the baud rate to a slower setting.
Use the optional connection cable to connect your 
scanner to another UBC3500XLT scanner or your 
personal computer. Optional software is available at 
http://www.racescanner.eu.

 

 

 Settings 

  

 

PC Control 

  

PC Control  Lets you set the baud rate your scanner 

uses to communicate with a personal computer.

• Off  The baud rate is not set.
• 9600 bps  The baud rate is set to 9600 bps.
• 19200 bps  The  baud rate is set to 19,200 bps.
• 38400 bps  The baud rate is set to 38,400 bps.
• 57600 bps  The baud rate is set to 57,600 bps.
• 115200 bps  The baud rate is set to 115,200 bps.

Lets you set your scanner as a master (source) or 
slave (recipient), letting you transfer programming to or 
from another UBC3500XLT scanner. See “Wired 
Cloning” on Page 42.

UB347ZH.fm  Page 41  Thursday, August 31, 2006  11:57 AM