Uniden UBC3500XLT 사용자 설명서

42

 

 

 Wired Clone 

  

• Master Sets the scanner to be the source scanner.
• Slave  Sets the scanner to be the recipient scanner.

To clone (copy) data directly from one UBC3500XLT 
scanner to another UBC3500XLT scanner, you must 
first connect the scanners to each other using the 
included connection cables and a DB9 null modem 
adapter and DB9 gender changer (neither included), 
available at most computer stores. Then you must set 
one scanner as the source and the other as the 
destination.
Plug the smaller end of each of the included connection 
cables into Remote on the right side of each scanner. 
Then connect the other end of the cables together 
using the null modem connector and gender changer.
Then set the scanner containing the programming you 
want to transfer as the master scanner, then set the 
other scanner as the slave scanner.

(Master scanner) Clone Master Press SCAN Key 

 

(Slave scanner) Clone Slave Press SCAN Key 

 

When you are ready to clone the scanner, press 

 

on the slave scanner first, then on the master scanner. 
The master scanner checks the connection between the 
two scanners, then transfers its data to the slave scanner. 
When the transfer is complete, Complete appears on 

both scanners. If the transfer did not work, Error 

appears on the master scanner.

UB347ZH.fm  Page 42  Thursday, August 31, 2006  11:57 AM