Uniden UBC3500XLT 사용자 설명서

74

Off - the scanner remains on the channel until the 

transmission stops.

Notes:

• If you are trying to test the Close Call feature with 

a nearby transmitter and you do not talk into the 
transmitter, the scanner will detect this as data 
and will skip the frequency when Data Skip is on. 
Turn the feature off or talk into the transmitter.

• This setting is ignored for AM/WFM/FMB 

channels.

• The default setting for this feature is Off.

 

 

 

Srch/CloCall Opt 

 

Set Delay Time 

 

 

This setting determines how long the scanner waits 
after a transmission ends before resuming quick 
search or Close Call operation. Select your setting, 
then press the scroll control.

Off The scanner resumes immediately when the 

transmission ends.

1-5 sec The scanner waits the set amount of time 

after the transmission ends before resuming.

Note: The default setting is 2 sec.

 

 

 

Srch/CloCall Opt 

 

Set Step 

 

This setting selects the frequency step used for setting 
the channels. Select your setting, then press the scroll 
control.

Auto The step is based on the band (see the table at 

the front of the manual)

UB347ZH.fm  Page 74  Thursday, August 31, 2006  11:57 AM