Uniden UBC3500XLT 사용자 설명서
76
Using Tone-Out
Fire Tone-Out Introduction
Your scanner can be set to respond to fire tone-outs
that use standard two-tone sequential paging, short
one-tone paging, and long group tone paging. You can
save up to 10 settings. When you select a setting in
standby mode, the scanner also monitors for any other
setting that uses the same transmit frequency,
modulation, and attentuation settings.
that use standard two-tone sequential paging, short
one-tone paging, and long group tone paging. You can
save up to 10 settings. When you select a setting in
standby mode, the scanner also monitors for any other
setting that uses the same transmit frequency,
modulation, and attentuation settings.
You need tone-out setup information from the agency
you wish to monitor.Check with your local agency or
on-line resources.
you wish to monitor.Check with your local agency or
on-line resources.
Setting Tone-Out Standby
Tone-Out for...
Tone-Out Standby
Turn the scroll control to select the tone-out to monitor.
All tone-outs that have the same frequency,
modulation, and attenuation setting as the one you
select, are also monitored.
All tone-outs that have the same frequency,
modulation, and attenuation setting as the one you
select, are also monitored.
In standby mode, the display cycles through all
monitored tone-out settings.Regardless of the current
display, the scanner always alerts on any received
tone-out that matches a stored setting.
monitored tone-out settings.Regardless of the current
display, the scanner always alerts on any received
tone-out that matches a stored setting.
If you press HOLD while in standby mode, the scanner
temporarily exits the mode and you hear all
transmissions on that frequency. No alerts sound,
even if a tone-out matches one you have stored. Press
HOLD again to return to standby mode.
temporarily exits the mode and you hear all
transmissions on that frequency. No alerts sound,
even if a tone-out matches one you have stored. Press
HOLD again to return to standby mode.
Setting Up Tone-Out
Tone-Out for ...
Tone-Out Setup
Scroll to select the tone-out (1 - 10) you want to
program, then press E
program, then press E
YES.
Then you can scroll to any
of the following settings and press E
YES
to select and
modify the selected settings:
Menu
Menu
Using Tone-Out
UB347ZH.fm Page 76 Thursday, August 31, 2006 11:57 AM