Uniden SC230 사용자 설명서

34

Note: Make sure the scanner's antenna is connected 
before you turn it on.

1. Turn Sql fully counterclockwise.

2. Press and hold 

 for about 2 seconds to turn on the 

scanner, then turn Vol clockwise until you hear a 
hissing sound.

3. Turn Sql clockwise until the hissing stops.

To begin scanning programmed systems, press Scan. 
The SC230 scans all unlocked systems in all activated 
quick-key groups.

Notes: 

• If no systems are programmed, or all systems are 

locked out, an error message appears. Program a 
system or select a system to scan.

• When scanning multiple systems, the SC230 scans 

systems according to the assigned quick key. 
Then the race assigned to the next quick key (1, 2, 3, 
4, etc.) is scanned.  Systems not assigned to a quick 
key are scanned last. Within a quick key, systems are 
scanned in the order they were assigned.

• Within a system, channels are scanned according to 

the assigned channel group, with the same priority as 
described above for systems.

• The SC230 scans a system for the duration you set 

using the System Hold Time option (see “Setting the 
System Hold Time” on Page 56). All unlocked chan-
nels are scanned at least one time regardless of the 
hold time setting.

SC230 Paper OM.fm  Page 34  Wednesday, October 6, 2004  10:51 AM