Uniden SC230 사용자 설명서

35

Each driver’s team has several different frequencies they 
can use during a race. These frequencies can change 
depending on local interference sources or other 
frequency issues. Your scanner is preprogrammed with 
all of the drivers and their possible frequencies that were 
known when it was manufactured.

Before you leave for the track, check the Internet to see if 
there are any frequency updates available for your race. 
You can save time at the track by setting up as much as 
possible before you leave.

When you arrive at the race, get a list of the actual fre-
quencies in use that race day. These are normally avail-
able for sale on the way into the facility. This list will show 
the actual frequency being used by each driver that day, 
as well as some other useful frequency information. 
Then, follow the steps in the sections below to adjust the 
scanner settings.

Follow these steps to select the appropriate frequency for 
each driver.

1. Press 0, rotate the scroll control to select the race, 

then press E.

2. Press CAR, enter the driver’s number, press E or 

CAR, press E,  rotate the scroll control to select the 
driver, then press E.

3. Rotate the scroll control to select the driver’s 

frequency. If the driver’s frequency is not listed, select 
NEW Frequency 

then enter the correct frequency.

4. Press Hold to set the selection.

SC230 Paper OM.fm  Page 35  Wednesday, October 6, 2004  10:51 AM