Uniden SC230 사용자 설명서

37

Within a system, you can assign groups of channels to a 
group quick key (see “Setting the Group Quick Key” on 
Page 59). 
Follow these steps to activate or deactivate a channel 
group within a system while scanning.
1. Press 

 to hold on the system (or hold 

 and 

rotate the scroll control to select the system). 

2. Continue to hold 

 and press the number key 

corresponding to the channel group you want to 
activate or deactivate.

Follow these steps to lock out a system so that it does not 
scan even if its quick key is selected.
1. While holding down 

, rotate the scroll control to 

select the system.

2. Continue to hold down 

 and press L/O to lock 

out the system.

3. Repeat Steps 1 and 2 to unlock a system you have 

previously locked.

Note: You can unlock only one race at a time. When you 
unlock a race, the scanner automatically locks the other 
races.

Follow these steps to lock out a channel so that it does 
not scan even if its system and channel group are 
selected.
1. While holding down 

, rotate the scroll control to 

select the system where the channel is stored.

2. Release  

then 

press 

Hold within 2 seconds to 

hold on the system.

SC230 Paper OM.fm  Page 37  Wednesday, October 6, 2004  10:51 AM