Uniden SC230 사용자 설명서

41

• Priority Off: Normal scanning
• Priority On: While scanning, the scanner interrupts 

every 2 seconds and checks the priority channels in 
each unlocked system. Priority channels in lower 
priority key numbered systems (starting from 1) have 
highest priority. Pri appears when you select this 
mode.

• Priority Plus: The scanner only scans priority 

channels in unlocked systems. Pri  flashes when you 
select this mode.

 

 

 Set Backlight 

 E

• 10 sec  The backlight stays on for 10 seconds after 

you press 

 + . 

• 30 sec  The backlight stays on for 30 seconds after 

you press 

 + . 

• Squelch The backlight turns on when the squelch 

opens then stays on for 5 seconds.

• Keypress  The backlight turns on when any key is 

pressed then stays on for 10 seconds.

• Infinite  The backlight turns on when you press 

+ 

 then stays on until you press 

 + 

 again.

Pressing any key while the backlight is on extends the 
backlight period. Pressing 

 + 

 while the backlight 

is on turns off the backlight.

Important! This deletes all preprogrammed data. 
You cannot restore preprogrammed data that has 
been deleted.

To initialize the scanner’s memory, turn off the scanner. 
Then, press 2, 9, and Hold while turning it on.

SC230 Paper OM.fm  Page 41  Wednesday, October 6, 2004  10:51 AM