Uniden SC230 사용자 설명서

42

Use the included connection cable to connect your  scanner 
to another SC230 scanner or your personal computer. 

 

 

 Xfer Information 

 E

• PC Control  Lets you set the baud rate your scanner 

uses to communicate with a personal computer. See 
“Connecting Your Scanner to a Personal Computer”.

• WIRED Clone  Lets you set your scanner as a master 

or a slave, letting you transfer programming to or from 
another SC230 scanner. See “Cloning the Scanner” 
on Page 43.

• On_Air Clone  Lets you clone all programmed data 

over the air to or from another SC230 scanner.

To connect your scanner to a 
personal computer, you must 
first set the scanner’s baud rate 
(the rate at which data is
transferred between the 
scanner and the computer, in 
bits per second (bps)). 
Hint: If you have trouble 
transferring data between your 
scanner and your 
computer, try setting the baud 
rate to a slower setting.

 

 

 Xfer Information 

 E 

PC Control

 

 E 

   

• Off  The baud rate is not set.
• 9600 bps  The baud rate is set to 9600 bps.
• 19200 bps  The  baud rate is set to 19,200 bps.
• 38400 bps  The baud rate is set to 38,400 bps.
• 57600 bps  The baud rate is set to 57,600 bps.

SC230 Paper OM.fm  Page 42  Wednesday, October 6, 2004  10:51 AM