Uniden UBC3300XLT 사용자 설명서
25
1. CSQ - The default setting is CSQ (carrier
squelch). In this mode the scanner will stop on
any transmission on a programmed frequency
(Squelch mode does not apply to trunking).
any transmission on a programmed frequency
(Squelch mode does not apply to trunking).
2. TONE SQ - In Tone Squelch mode, if you have
set a subaudible tone (CTCSS or DCS) for a
frequency, the scanner will only stop on that
frequency if the transmission includes the
prescribed tone.
frequency, the scanner will only stop on that
frequency if the transmission includes the
prescribed tone.
3. TONE SEARCH - In this mode, as soon as the
scanner stops on any (non-trunked) channel, the
scanner will begin to search for any subaudible
tone that is being used on a transmitted
frequency. The scanner will check each CTCSS
tone sequentially and it will find DCS tones
instantly.
scanner will begin to search for any subaudible
tone that is being used on a transmitted
frequency. The scanner will check each CTCSS
tone sequentially and it will find DCS tones
instantly.
9:BANK TAG
Allows you to set an alphanumeric text tag for
individual banks in the scanner (1-10). (The "0" key
represents bank number 10.) For example, you may
wish to set the bank one text tag as Law
Enforcement, the second bank as Fire, etc.
individual banks in the scanner (1-10). (The "0" key
represents bank number 10.) For example, you may
wish to set the bank one text tag as Law
Enforcement, the second bank as Fire, etc.
0:P-25 CARD
Select 2:DISABLE in this mode.
:BATTERY SAVE
When you set Battery Save to ON in this Menu,
Battery Save is active in Scan Hold mode (except
Priority Scan mode).
Battery Save is active in Scan Hold mode (except
Priority Scan mode).
UBC3300XLT OM 5/14/04 3:29 PM Page 25