Uniden UBC3300XLT 사용자 설명서

26

Before the UBC3300XLT can begin conventional scanning,
you must program a frequency into at least one channel. 

Repeat this procedure for each channel you want to program.

1. Select frequencies you received from your dealer, from

various sources on the internet, or from one of the guides
listed on page 11.

2. Press MENU/BACK.

3. Select 2:SCAN OPTION / 1:CONVENTIONAL by

rotating the VFO and pressing E.

4. Select a channel.

a. Enter the 

channel number
using the keypad.

b. Then press E.

5. Select 1:FREQUENCY, and press E.

a. Enter the frequency number

using

(decimal key) and the

keypad.

b. Then press E.

6. Enter the alpha tag and press E. 

(See page 28.)

7. The following display appears, select

the location you want.

Note: • To clear a mistake while entering the frequency,

press 

(decimal key) repeatedly until the 

display is cleared.

         C 001

1:FREQUENCY

2:DELAY

3:TONE DATA

         C 001

 855.0000  FM

ALPHA TAG

¡

1:OTHER CHANNEL

2:CHANNEL OPTION

3:DONE

         C 001

0000.0000

FREQUENCY

UBC3300XLT OM  5/14/04  3:29 PM  Page 26