Nikon COOLPIXP7100 사용자 설명서

Preparation 3 Insert a Memory Card

Th
e 

Bas

ics of Shoo

ting and

 Pl
a

y

b

a

ck

Before opening the battery-chamber/memory card slot 
cover, turn the camera off and confirm that the power-
on lamp and the monitor are off.

Press the memory card in lightly with your finger (1) to 
partially eject it, and then pull it out straight (2).

B

The camera, battery, and memory card may be hot immediately after using the camera. Observe 
caution when removing the battery or memory card.

Camera data, including images and movies, can be saved in either the camera’s 
internal memory (approximately 94 MB) or on a memory card. To use the camera’s 
internal memory for shooting or playback, first remove the memory card.

The following Secure Digital (SD) memory cards have been tested and approved 
for use in this camera.
• When recording a movie onto a memory card, a memory card with an SD speed 

class of Class 6 or higher is recommended. If the transfer speed of the card is 
slow, the movie recording may end unexpectedly.

1

Before using a card reader or similar device, check that the device supports 2 GB cards.

2

SDHC-compliant. Before using a card reader or similar device, check that the 
device supports SDHC.

3

SDXC-compliant. Before using a card reader or similar device, check that the 
device supports SDXC.

• Contact the manufacturer for details on the above cards.

SD memory cards

1

SDHC memory cards

2

SDXC memory cards

3

SanDisk

2 GB

4 GB, 8 GB, 16 GB, 32 GB 64 GB

TOSHIBA

2 GB

4 GB, 8 GB, 16 GB, 32 GB 64 GB

Panasonic

2 GB

4 GB, 8 GB, 12 GB, 
16 GB, 32 GB

48 GB, 64 GB

Lexar

-

4 GB, 8 GB, 16 GB, 32 GB -