Nikon COOLPIXP7100 사용자 설명서

Step 1 Turn the Camera On

Th
e 

Bas

ics of Shoo

ting and

 Pl
a

y

b

a

ck

• When the camera is turned on, the power-on lamp (green) lights and the 

monitor is turned on (the power-on lamp turns off when the monitor is turned 
on).

• To turn off the camera, press the power switch. Both the monitor and the 

power-on lamp are turned off.

• To turn on the camera in playback mode, press and hold the 

c

 (playback) 

button. At this time, the lens does not extend.

C

If no operations are performed for a while, the monitor will turn off, the camera will enter standby 
mode, and the power-on lamp will blink. If no operations are performed for another three minutes, 
the camera will turn off automatically.

To turn on the monitor again in standby mode, perform either one of the following operations.

• Press the power switch, shutter-release button or the 

c button.

• Rotate the mode dial.

• The time that elapses before the camera enters standby mode can be changed using the Auto off 

setting in the setup menu (

A104).

• By default, the camera enters standby mode in about one minute when you are using shooting 

mode or playback mode.

• If you are using the optional AC Adapter EH-5b, the camera enters standby mode after 30 minutes. 

This setting cannot be changed.

1/250

1/250

1/250

38

38

F5.6

F5.6

F5.6

38

Blinks

No operations 

performed.

No operations 

performed.

3 min

Camera enters 

standby mode.

Camera turns off.