Siemens TP177B 사용자 설명서
Automation and Drives - SCE
T I A Training Document
Page 12 of 129
Module
F6
Issued: 02/2008
Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
3. PROJECT
DESCRIPTION
3.1 Hardware
Configuration
In our sample program for a color mixing plant, we are using a programming device with the WinCC
flexible 2005 Advanced Engineering System and WinCC flexible 2005 Runtime.
The color mixing plant is controlled by means of a SIMATIC S7-300. By using a touch panel
(TP177B), the operator can operate the process using the graphic operator interface. For example,
the operator can specify a setpoint for the controller, or start a motor.
The programming device, the SIMATIC S7-300 controller and the operator panel TP177B are
connected to each other by means of the MPI.
The color mixing plant is connected to the controller with digital inputs and outputs.
PC for Configuring
TP177B as operator panel
Note
With WinCC flexible 2005 Runtime, the touch panel TP177B can also be represented on the
programmer. However, when starting WinCC flexible Runtime, the MPI address of the panel
(MPI=1) is set automatically on the programmer. When using a real panel, the MPI address has to
first be reset on the programmer to MPI=0.