Siemens TP177B 사용자 설명서
Automation and Drives - SCE
T I A Training Document
Page 13 of 129
Module
F6
Issued: 02/2008
Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
3.2 Plant
Description
A color mixing plant is controlled with a SIMATIC S7-300 in the automatic or in the manual mode. In
the "Automatic“ mode, the three tanks are filled with a two step control. At the minimum level, the
inflow valve opens automatically, and after the maximum level is reached, it is closed again. After the
start button is operated, the specified program is executed: first, the outflow valves are opened and
the container is filled from tanks with the specified amounts. After the outflow valves are closed, the
mixer motor is started. After the mixing time has expired and after a short idle phase, the outflow
valve of the container is opened and the finished color mixture is drained. When the container is
empty, the lamp of the start button lights up, and a new color mixture can be started.
In the "Manual“ mode, the automatic outflow is canceled, and all valves as well as the mixer motor
can be operated manually. The lamps in the buttons for manual operation are lit.
Note
The specified amounts and the time base are determined by the program. If you want another color
mixture, the specified amounts and the time base have to be changed, and a new program has to be
loaded to the controller.
T1 Inflow T1 Outflow T2 Inflow T2 Outflow T3 Inflow T3
Container