DELL MD3220 사용자 설명서

Configuration: Disk Groups and Virtual Disks

4 Locate the disk group, and label the physical disks. 
5 Place the disk group offline. 
6 Obtain blank physical disk modules or new physical disks. 

On the target storage array:

1 Verify that the target storage array has available physical disk slots. 
2 Verify that the target storage array supports the physical disks that you 

import. 

3 Verify that the target storage array can support the new virtual disks. 
4 Verify that the latest version of firmware is installed on the RAID 

controller module. 

The import disk group operation adds the imported disk group to the target 

storage array. After you complete the import disk group operation, all of the 

physical disks have Optimal status. Any associated virtual disks or free 

capacity nodes are now shown in MDSM installed on the target storage array.

You lose access to your data during the export/import process.

You must export a disk group before you move the disk group or import the 

disk group.

You must insert all of the physical disks that are part of the disk group into 

the enclosure before the disk group can be imported.

On the target storage array:

1 Insert the exported physical disks into the available physical disk slots. 
2 Review the Import Report for an overview of the disk group that you are 

importing. 

3 Check for non-importable components. 
4 Confirm that you want to proceed with the import procedure. 

Some settings cannot be imported during the import disk group 

procedure.

book.book  Page 131  Monday, June 21, 2010  11:00 AM