DELL MD3220 사용자 설명서

Troubleshooting: Your Storage Array Software

4 When you have located the physical disks, click OK.

The LEDs stop blinking. If any other blink operations (Blink Disk Group, 

Blink Storage Array, Blink Physical Disk Ports, or Blink Expansion 

Enclosure) are currently being invoked from another storage management 

station, these LEDs also stop blinking. 

5 In the rare case that the LEDs on the physical disks do not stop blinking, 

in the AMW, select 

Storage Array Blink Stop All Indications.

If the LEDs successfully stop blinking, a confirmation message appears.

6 Click OK.

You can use the Blink option to physically locate and identify an expansion 

enclosure in the storage array.
The LED activation varies according to the type of expansion enclosure that 

you have.

• If you have an expansion enclosure with a white LED, the Blink Expansion 

Enclosure operation causes the white LED on the expansion enclosure to 

come on. The LED does not blink.

• If you have any other types of expansion enclosures, this operation causes 

the appropriate LED on all of the physical disks in the expansion enclosure 

to blink.

To locate the expansion enclosure:

1 Select the Physical tab.
2 Select a physical disk in the expansion enclosure that you want to locate.
3 Select Physical Disk Blink Expansion Enclosure.

The LED or LEDs on the expansion enclosure or physical disks come on.

4 When you have located the expansion enclosure, click OK.

The LEDs stop blinking. (If you have an expansion enclosure with a blue 

LED, the LED goes off). If any other blink operations (Blink Storage Array, 

Blink Disk Group, Blink Physical Disk Ports, Blink Expansion Enclosure, or 

Blink Physical Disk) are currently being invoked from another storage 

management station, these LEDs also stop blinking.

book.book  Page 233  Monday, June 21, 2010  11:00 AM