DELL MD3220 사용자 설명서

Configuration: About Your Storage Array

• You must provide a SMTP mail server name and an e-mail sender address 

for the e-mail addresses to work.

• The e-mail addresses that you had previously configured appear in the 

Configured e-mail addresses area.

• You must use fully qualified e-mail addresses, for example, 

name@mycompany.com.

• You can configure multiple e-mail addresses before you click 

OK.

To add a management console to the list of addresses configured to receive 

SNMP alerts:

1 Open the Configure Alerts dialog by performing one of these actions:

• In the Tree view or the Table view on the Devices tab in the EMW, 

select a node, and select 

Edit Configure Alerts. Go to step 3.

• In the Setup tab in the EMW, select Configure Alerts. Go to step 2.

2 Select one of the following radio buttons to specify an alert level:

• All storage arrays—Select this option to send an alert notification 

about events on all storage arrays.

• An individual storage array—Select this option to send an alert 

notification about events that occur in only a specified storage array.

These results occur, depending on your selection:
• If you selected All storage arrays, the 

Configure Alerts dialog appears.

• If you selected An individual storage array, the Select Storage Array 

dialog appears. Select the storage array for which you want to receive 

alert notifications and click 

OK. The Configure Alerts dialog appears. 

If you do not know which storage array to select, click Blink to turn on 

the LEDs of the storage array. 

3 Select the SNMP tab to configure the SNMP alert destinations.

• Adding an SNMP address—In Community name, type the 

community name. In 

Trap destination, type the trap destination, and 

click 

Add. 

book.book  Page 77  Monday, June 21, 2010  11:00 AM