Festool PI571782 사용자 설명서

7

tronics switch the tool off when it reaches 

a critical motor temperature. Let the tool 

cool down for approx. 3-5 minutes before 

using it again. The tool requires less time 

to cool down if it is running, i.e. in neutral 

position.

 Always remove the power plug 

from the socket before carrying out any 

work on the power tool. 

  Always connect the tool to a dust ex-

tractor.

You can connect a Festool extractor with an 

extractor hose diameter of 27 mm to the 

dust extraction port (4.1).

The edge protector (5.1) prevents the sand-

ing pad from touching the edge perpendicu-

lar to a surface (e.g. when sanding along a 

wall), thereby preventing the machine from 

rebounding.
Assembly: Slide the edge protector onto the 

machine until it latches into place.

You can use the switch (6.1) to set two dif-

ferent sanding motions. 

 The change can only be made 

when the sanding pad is stationary, as the 

switch is locked in place during operation 

for safety reasons.

  The Rotex rotary motion is a combi-

nation of rotary and eccentric mo-

tions. This motion is recommended 

for sanding with aggressive material