Festool PI571782 사용자 설명서

9

 Stickfi x is a hook-and-loop fastening 

system. Stickfi x sanding pads allow 

the use of self-adhesive hook-and-

loop abrasives such as Stickfi x sand-

papers and sanding cloths. 

Simply press the abrasive onto the sanding 

pad (7.2) and pull it off again after use.

Please note: Use only abrasives with an 

undamaged Stickfi x hook-and-loop coating. 

Before use, check that the coating has not 

been damaged by improper use (such as 

over heating).

To prevent damage, use PoliStick polish-

ing attachments (sponges, felt, lambswool 

bonnets) only with the special polishing 

pad fi tted on the tool instead of a sanding 

pad. Like StickFix abrasives, the PoliStick 

polishing attachments are simply pressed 

onto the polishing pad and pulled off after 

use.

 Always secure the workpiece 

in such a manner that it cannot move while 

being sanded.

 Never overload the tool by us-

ing too much pressure! The best sanding 

results are achieved when applying mod-

erate pressure. Sanding performance and 

quality depend primarily on the choice of 

the right abrasive. 
For safe guidance, hold the tool with one 

hand on the motor housing (8.2) and the 

other hand on the gear head (8.1).

Tables A and B show the settings we rec-

ommend for different sanding and polishing 

work.