Festool PAC571782 사용자 설명서

9

 Use only abrasives with an un-

damaged Stickfix hook-and-loop coating. 

Before use, check that the coating has not 

been damaged by improper use (such as 

over heating).

To prevent damage, use PoliStick polishing at-

tachments (sponges, felt, lambswool bonnets) 

only with the special polishing pad fi tted on 

the tool instead of a sanding pad. Like StickFix 

abrasives, the PoliStick polishing attachments 

are simply pressed onto the polishing pad and 

pulled off after use.

The auxiliary handle (Accessories, 8.1) can 

be screwed onto either the right or left of the 

gear head.

 Always secure the workpiece in 

such a manner that it cannot move while be-

ing sanded.

 Never overload the tool by using 

too much pressure! The best sanding re-

sults are achieved when applying moderate 

pressure. Sanding performance and quality 

depend primarily on the choice of the right 

abrasive. 
For safe guidance, hold the tool with both 

hands.

Application
Tables A and B show the settings we recom-

mend for different sanding and polishing 

work.

 Observe the following safety pre-

cautions when working on metals:
• Pre-connect a residual current circuit-break-

er (FI, PRCD).

• Connect the tool to a suitable dust extrac-

tor.