Philips Trilogy 200 사용자 설명서

Chapter 4 Ventilator Setup

To attach supplemental oxygen to the device:

1.  Connect the oxygen tubing to the Oxygen Inlet Quick Connect. 

Then, connect the Quick Connect to the Oxygen Inlet on the 
back of the ventilator.

Oxygen Inlet

Oxygen Source

Tubing

Oxygen Inlet

Quick Connect

2.  Make sure you press the Oxygen Inlet Quick Connect firmly into 

the inlet. You should hear a click, and the latch at the top of the 
inlet will pop up.

 

This device is only compatible with a low flow oxygen source 
providing up to 15 l/min.