Capresso Impressa J5 사용자 설명서

17.9 CHANGING THE LANGUAGE
Your J5 is set to 

. You can the display from English to

French (

), Italian (

), Dutch (

) or German

(

)

• Push and hold the rotary dial until the display shows 

.

• Turn the dial clockwise until the display shows 

.

• Push the rotary dial. The display shows  

.

• Turn the dial to select the desired language (e.g. 

)

and push the dial to confirm. For two seconds the display 
shows 

and then it shows 

(Italian). 

• Turn the rotary until the display shows 

.

• Push the rotary dial. In this example (Italian) the display now 

shows 

(instead of 

).

The machine monitors how many coffees are brewed and how
often the rinsing program is activated. After approx. 200 coffees
or 80 initial rinse cycles the display will show 

and the Rinse button is illuminated.  
You can continue to make coffee, however we highly recom-
mend cleaning the machine as described below within the next
few days. This cleaning program will remove oil build-ups in the
brewing chamber. It takes only about 15 minutes. Use the
enclosed white cleaning tablet. The machine comes with a pack
of 2 tablets. To re-order see chapter 25.
Important: Once the cleaning program has started do not 
interrupt the procedure.

1. Push the Rinse button. The display shows 

Attention: If the tray and the used coffee container are 
already empty, you still need to remove the tray for approx. 20 
seconds and then replace it. 

2. Make sure that the water container is at least half full. Remove

and empty the tray and the used coffee container and replace.
The display shows 

and the rinse button is 

illuminated. 

3. Place a container (at least 20 oz.) underneath the coffee 

spouts and push the Rinse button (Fig. 2).

4. The display shows 

. The machine pumps one or 

two short cycles of water through the coffee spout. Then the 
display shows 

.

5. Open the ground coffee funnel lid and drop one white tablet 

into the opening (Fig. 27). Close the lid. The display shows 

6. Push the rinse button again, and the cleaning program 

continues. The display shows 

. The machine starts

the automatic cleaning program by dispensing water in intervals
into the container underneath the coffee spout. The program 
stops automatically and the display shows 

.

7. Remove the container and then the drawer and tray.
8. Empty the drawer and the ground coffee container and replace.
9. The display shows 

.

The machine will automatically remind you after the next 200 
cups of coffee to repeat this cycle.

18.2 MANUAL TABLET CLEANING CYCLE
It is possible that the brewing process slows down before the
automatic message (chapter 18.1) appears. Sometimes dark

28.