Capresso Impressa J5 사용자 설명서
READY
,
• Push and hold the Rotary Dial until the display shows
RINSE
.
• Turn the dial clockwise until the display shows
ENERGY –
.
• Push the rotary dial. The display shows
SAVE –
• Turn the dial until the display shows
SAVE
✓
.
• Push the rotary dial. For two seconds the display shows
OK
and then
ENERGY
✓
.
• Turn the rotary until the display shows
EXIT
.
• Push the rotary dial.
READY
.
17.4 SETTING THE TIME
Setting the time lets you set an auto-on time (chapter 17.5).
Setting the time lets you set an auto-on time (chapter 17.5).
READY
,
• Push and hold the rotary dial until the display shows
RINSE
.
• Turn the dial clockwise until the display shows
TIME
• Push the rotary dial. The display shows
–:–
Turn the dial to set
the hour and push the dial to confirm the hour setting.
• Turn the dial to set the minutes and push to confirm For two
seconds the display shows
OK
and then
TIME
.
• Turn the rotary until the display shows
EXIT
.
• Push the rotary dial.
READY
.
Please note: If you turn the machine off with the main power
switch (Fig. 1a) or if you unplug the machine or experience a
power outage, the actual time will not be retained. The next time
you turn the machine on, the display will first show
switch (Fig. 1a) or if you unplug the machine or experience a
power outage, the actual time will not be retained. The next time
you turn the machine on, the display will first show
TIME –:–
.
Turn the Rotary dial to set the hours, then push the Rotary dial.
Turn the Rotary dial again to set the minutes and push to
confirm. Now the
Turn the Rotary dial again to set the minutes and push to
confirm. Now the
AUTO-ON
time will be automatically restored
(see next chapter).
17.5 SETTING THE AUTO-ON TIME /
UNIT ON
You can set a time at which the machine turns itself on. This way
you don’t have to wait for the machine to warm up. At the pro-
grammed time the J5 turns itself on, it will start heating and the
display will then show
you don’t have to wait for the machine to warm up. At the pro-
grammed time the J5 turns itself on, it will start heating and the
display will then show
RINSE
. Just push the Rinse button and
within seconds you can brew your first cup of coffee.
Please note: Auto-on will only work if you set the actual time
and the main power switch is turned on (when the small red light
in the On/Off switch is illuminated, you know that the main
power is on).
Setting the time allows you to program an auto-on time.
Please note: Auto-on will only work if you set the actual time
and the main power switch is turned on (when the small red light
in the On/Off switch is illuminated, you know that the main
power is on).
Setting the time allows you to program an auto-on time.
READY
,
• Push and hold the rotary dial until the display shows
RINSE
.
• Turn the dial clockwise until the display shows
UNIT ON
.
• Push the rotary dial. The display shows
–:–
• Turn the dial to set the hour and push the dial to confirm the
hour setting.
• Turn the dial to set the minutes and push to confirm For two
seconds the display shows
OK
and then
UNIT ON
.
• Turn the rotary until the display shows
EXIT
.
• Push the rotary dial.
READY
.
17.6 CHANGING THE AUTO-OFF SETTING /
OFF AFTER
Your machine is pre-set to turn itself off 2 hours after last use.
You can set the Auto-Off from .5 hour to 15 hours or you can set
it to
You can set the Auto-Off from .5 hour to 15 hours or you can set
it to
INACTIVE
. In this case the machine will not turn itself off
automatically.
Recommendations:
• If you use the machine only in the morning, leave the auto-off
Recommendations:
• If you use the machine only in the morning, leave the auto-off
at 2 hours.
26.