Sunrise Global CM250 IP 사용자 설명서
Chapter 4
PC-IP Operation
39
Getting Cable Modem Data
The current configuration of the Install may also be viewed by
clicking on the Get button. You may add this to the current
database by clicking on Database/Save As or discard the data by
re-opening the desired database.
clicking on the Get button. You may add this to the current
database by clicking on Database/Save As or discard the data by
re-opening the desired database.
Save Database
To save the current setting to your database, click on the Save
button. If the current database is the default database, you will
need to click on Database/Save As to give your database a new
name. The default database cannot be edited.
button. If the current database is the default database, you will
need to click on Database/Save As to give your database a new
name. The default database cannot be edited.
Sending Cable Modem Data to the Install Profiler
To send the currently displayed data to the Install Profiler, click
on the Send button. The Install Profiler is immediately updated.
on the Send button. The Install Profiler is immediately updated.
Downstream Ranging
Ranging Method - The Ranging method instructs the CM500 IP
how to look in the downstream system for a CMTS (Cable
Modem Termination System). The two choices are Dwell and
Scan.
how to look in the downstream system for a CMTS (Cable
Modem Termination System). The two choices are Dwell and
Scan.
Dwell - Causes the Install Profiler to go to the first channel in the
Downstream Ranging Channel list (setup in the active Channel
Table) and to dwell on that channel until it locks on the
downstream DOCSIS channel. This setting is recommended
when you have only one specific DOCSIS CMTS downstream
channel.
Downstream Ranging Channel list (setup in the active Channel
Table) and to dwell on that channel until it locks on the
downstream DOCSIS channel. This setting is recommended
when you have only one specific DOCSIS CMTS downstream
channel.
SCAN - Causes the Install Profiler to sequence through the list
of Downstream Ranging Channels until it successfully ranges
with the CMTS. Whenever the active channel plan is changed,
the Downstream Ranging Channels for that channel table will be
used. This setting is recommended when you have multiple
DOCSIS CMTS downstream channels.
of Downstream Ranging Channels until it successfully ranges
with the CMTS. Whenever the active channel plan is changed,
the Downstream Ranging Channels for that channel table will be
used. This setting is recommended when you have multiple
DOCSIS CMTS downstream channels.
Network Settings
MAC Address - Select either Use Defined or Internal. If internal
is selected, the Install Profiler will attempt to connect to the
CMTS using its own internal MAC address. The network
is selected, the Install Profiler will attempt to connect to the
CMTS using its own internal MAC address. The network