Sunrise Global CM250 IP 사용자 설명서
PC-IP Software
User’s Manual
40
administrator prior to registering on the network must provision
this address. If User Defined is selected, the user will be
prompted to enter a user-defined address or accept the internal
MAC address at the beginning of the Cable Modem test. The
internally programmed MAC address is stored in memory and
used as the default if the user does not enter a custom address. A
custom address is only stored until the Install Profiler is turned
off. Using an Entered MAC address ensures that the customer’s
MAC address is properly provisioned on the network.
this address. If User Defined is selected, the user will be
prompted to enter a user-defined address or accept the internal
MAC address at the beginning of the Cable Modem test. The
internally programmed MAC address is stored in memory and
used as the default if the user does not enter a custom address. A
custom address is only stored until the Install Profiler is turned
off. Using an Entered MAC address ensures that the customer’s
MAC address is properly provisioned on the network.
Note:
You may enter the MAC address of DOCSIS 1.0
cable modem in the CM 500 to emulate an existing
modem, but not a modem running in a DOCSIS1.1
or 2.0 mode.
cable modem in the CM 500 to emulate an existing
modem, but not a modem running in a DOCSIS1.1
or 2.0 mode.
Access to MAC Address - Select Enabled or Disabled. Allows the user
the flexibility to change the MAC address when initiating any cable
modem or SMART test.
the flexibility to change the MAC address when initiating any cable
modem or SMART test.
Upstream
BkER Packet Delay - 0 to 500 mSec selectable in 20 mSec
increments. This is the time between data packets being sent
back to the CMTS router for BKER measurements. The default
is 20 mSec. Large packets sent too often may be discarded by the
CMTS if they compete with live data traffic.
increments. This is the time between data packets being sent
back to the CMTS router for BKER measurements. The default
is 20 mSec. Large packets sent too often may be discarded by the
CMTS if they compete with live data traffic.
BkER Packet Size - Sets the size of the test packets sent to the
CMTS router for BKER testing. Select from 0, 256, 512, 768 or
1024. The default is 0. Large packets sent too often may be
discarded by the CMTS if they compete with live data traffic.
CMTS router for BKER testing. Select from 0, 256, 512, 768 or
1024. The default is 0. Large packets sent too often may be
discarded by the CMTS if they compete with live data traffic.
CMTS PING Address - Enter the server address to send data
from the Install Profiler to the CMTS IP address for BKER tests
(the server will send back the same data). The default address
000-000-000-000 specifies the default router – typically the
CMTS.
from the Install Profiler to the CMTS IP address for BKER tests
(the server will send back the same data). The default address
000-000-000-000 specifies the default router – typically the
CMTS.
Upload FTP
File Server Address - Enter the FTP file server address to
upload saved data from the Install Profiler to this FTP IP address.
The default address specifies an FTP site maintained by Sunrise
Telecom. You will want to setup your own FTP server to store
your data. The Install Profiler will create a directory tree when
the upload is generated, with the top level as the System Name,
upload saved data from the Install Profiler to this FTP IP address.
The default address specifies an FTP site maintained by Sunrise
Telecom. You will want to setup your own FTP server to store
your data. The Install Profiler will create a directory tree when
the upload is generated, with the top level as the System Name,