Sunrise Global CM250 IP 사용자 설명서
Chapter 4
PC-IP Operation
51
Figure 4-26
Frequency - Double click on the Frequency box to enter the
desired frequency for each marker. Any frequency from 5 to 50
MHz (65 MHz for International models) may be entered.
desired frequency for each marker. Any frequency from 5 to 50
MHz (65 MHz for International models) may be entered.
Bandwidth - Double click on the Bandwidth box to enter the
desired frequency for each marker. Any bandwidth may be
entered from 0, for analog carriers, to 8 MHz for digital carriers.
Under or over setting this value will result in erroneous
measurements.
desired frequency for each marker. Any bandwidth may be
entered from 0, for analog carriers, to 8 MHz for digital carriers.
Under or over setting this value will result in erroneous
measurements.
Detector - Click on the white detector box to display a pull down
menu of the selections: Average for Digital signals or Peak for
Analog carriers.
menu of the selections: Average for Digital signals or Peak for
Analog carriers.
Limits
Pass/Fail limits may be set for the C/I (carrier to ingress), C/N
(carrier to noise) ratio calculations and the overall maximum
Ingress Limit. Double click on the current setting to enter the
new desired settings.
(carrier to noise) ratio calculations and the overall maximum
Ingress Limit. Double click on the current setting to enter the
new desired settings.