Sunrise Global CM250 IP 사용자 설명서
Chapter 4
PC-IP Operation
53
Figure 4-27
Print
Select the Print icon from the main menu to print the current
configuration screen in a database format using the current
default printer (per Windows setup).
configuration screen in a database format using the current
default printer (per Windows setup).
Print Preview
Print Preview may be selected from the File menu to display a
screen preview of the Return Pilot Generator configuration
information that will be printed.
screen preview of the Return Pilot Generator configuration
information that will be printed.
LP100 LEAKAGE PROFILER (OPTION)
The LP100 Leakage Profiler is with the Install Profiler to locate
and measure leakage. To enter the Leakage mode, press the Shift
and then the Option keys on the keypad. An Options menu will
be displayed, similar to the main menu, but with Icons for the
Options that are installed on your Install Profiler.
and measure leakage. To enter the Leakage mode, press the Shift
and then the Option keys on the keypad. An Options menu will
be displayed, similar to the main menu, but with Icons for the
Options that are installed on your Install Profiler.
The LP100 has two calibrated modes, standard and short dipole.
Measurements are calibrated in both modes, however the standard
mode (full length dipole) is recommended for FCC reporting.
The collapsed “short dipole” mode is very useful when locating
Measurements are calibrated in both modes, however the standard
mode (full length dipole) is recommended for FCC reporting.
The collapsed “short dipole” mode is very useful when locating