ADIC 601354 사용자 설명서

3-24

Initial Configuration

601354 Rev A

After a media class is successfully configured and registered 
with VolServ, it must be associated with one or more archives. 
This association is referred to as an archive media class. 
Archive media classes are created using the Create Archive 
Media Class command. 

VolServ software acquires archive media class parameters via 
the GUI and API. Basic archive media class parameters consist 
of archive name, media class name, archive class percentage, 
action mode, high mark, low mark, migration priority, 
migration archive, and preferred media placement. 

See the following subsections for detailed discussions 
concerning the archive class percentage, action mode, high 
mark, low mark, migration priority, migration archive, and 
preferred media placement.

A percentage of the media class capacity can be associated with 
an archive based on this parameter. Refer to the Using the 
VolServ GUI book and note that the entry method uses a slide 
bar. As the slide is moved, the actual quantity of media to be 
associated with the archive is displayed in a text area just above 
the slide bar. Note that the quantity will not exceed the lesser of: 

•

The amount of bins in the archive

•

The amount of unassociated media remaining in the Media 
Class