ADIC 601354 사용자 설명서

3-26

Initial Configuration

601354 Rev A

Although not enforced by VolServ software, there is one 
restriction that should be applied to archive class percentage 
when media migration is planned. This restriction is there 
should be no Media Class overlap. Using the figure in 

Archive should equal the total capacity of the Blank Media 
Class Group and portions of Media Class Groups A and B that 
are associated with the Automated Archive. 

The specification of action mode, low mark, and high mark is 
made for each archive media class, as well as for each media 
type in a configured archive. As suggested by low mark and 
high mark, action may or may not be triggered when the amount 
of media in an archive media class reaches a calculated low 
mark or high mark threshold. 

The SA can choose action modes of none, notify, or migrate. 
Depending on the action mode option selected, either no 
notification, or migration of media from one archive to another 
occurs when the archive media class high mark threshold is 
reached. 

During some operations, media are removed from an archive. 
When this occurs, the media removed from an archive may 
cause an archive media class fill level to reach its low mark 
threshold. If the notify action mode is selected, a notification is 
sent to the Volume Server SysLog Console and appropriate 
archive Console. 

A few operations result in adding media to an archive and result 
in exceeding the high mark threshold for the archive media 
class fill level. When the fill level reaches the high mark 
threshold and: 

•

The notify action mode is selected, a notification is sent to 
the Volume Server SysLog Console.