Vermont Casting DVBR42 사용자 설명서

23

1.  Turn off gas.
2.  Let the fireplace cool if it has been operating.
3.  Remove valve cover. (Fig.47)
4.  Release the two (2) clamps at the bottom of the 

window frame by pulling back on the clamp handles. 

  (Fig. 48)
5.  Lift off the glass frame as shown. (Fig. 48)
6.  To reinstall glass follow the above procedure in re-

verse. 

1.  Remove glass.
2.  Remove two (2) hex nuts securing grate to hearth 

pan. (Fig. 49)

3.  Set left and right panels on hearth and bring towards 

front of unit.

4.  Replace grate assembly.

It is necessary to clean the glass periodically.  During 
start-up condensation, which is normal, forms on the 
inside of the glass and causes lint, dust and other 
airborne particles to cling to the glass surface.  Also 
initial paint curing may deposit a slight film on the glass.  
It is therefore recommended the glass be cleaned 

two or three times with a non-ammonia household 
cleaner and warm water (gas fireplace glass cleaner 
is recommended).  After initial use glass should be 
cleaned two or three times during heating season.

G584-501 

Remove glass frame

2/99   djt

Clamps

Glass Frame

Fireplace 
Front

Glass 
Panel

Glass 
Panel

Pull Clamp 
Hook

Fig. 48  Glass panel removal.

G584-501

H100

hearth Panels

3/15/99   djt

Grate

Burner

Hearth Panels

H100

Fig. 49  Hearth panel location.

G584-500

Remove valve cover

2/99   djt

Valve Cover

Valve

Fig. 47 Valve cover location.

G584-500

Pins

Locating Holes

• 

The use of any non-approved replacement glass will 
void all product warranties.

• 

Care must be taken to avoid breakage of the glass.

• 

•